Connect TVT IP Camera to TVT NVR – General Guide

We are writing down a guide to download Connect TVT IP Camera to TVT NVR. If you don’t know the basics then better concern the expert technician. The IP address of the camera must be in the same series as the TVT NVR IP address. Users can change the NVR IP address directly from the screen but to change the IP address of the TVT camera, some essential tools are required. TVT also offers a tool for modifying the IP address of the camera. Find here. Using this tool you can modify the IP address of the camera according to your NVR IP address.

How to Connect TVT IP Camera to TVT NVR

TVT IP camera default IP address

192.168.226.201 is the default IP address of the TVT IP camera.

TVT IP camera Tool

You can download the TVT IP camera tool from the TVT website.

First Step: IP address of TVT NVR

Before connecting the camera to TVT NVR you should set an IP address of TVT NVR. Suppose the NVR IP address is 192.168.1.200 and the subnet mask is 255.255.255.0. This IP address should be according to your existing network gateway.

CONNECT TVT IP CAMERA TO TVT NVR

Second Step: Modify the IP address of the TVT IP Camera

Now modify the IP address of the Camera with the same series of NVR IP addresses. For example, NVR IP address is 192.168.1.200 then IP camera address should be like 192.168.1.XXX.

Download Tool from Here

Use IP tool by TVT Find here. Note: Use different IP addresses for all TVT IP cameras. Connect all Cameras to the NVR via switch or router. Now open the setting and go to add the camera.

CONNECT TVT IP CAMERA TO TVT NVR

Third Step: Add Cameras to NVR

Here, You discover all IPs of the TVT IP camera. Select cameras as per your need. You can likewise adjust the camera IP address from here by click on the altered image of the specific camera. In the event that all alright, select camera by tapping the checkbox and snap add button. Presently the camera will show in the live see.

CONNECT TVT IP CAMERA TO TVT NVR

Final Step. Add Camera Manually

You can likewise add a camera Manually if the automatic procedure failed to add the cameras. Simply go to add physically tab and put the IP address of the camera. Do not neglect to set different alternatives, for example, username, secret phrase, and convention.

Add a Comment

Your email address will not be published. Required fields are marked *